The same easy to configure eSort conveyor and control cards also operate the entire line of eSorters & Diverts. Controlled by eSort Insight cards all eSort products plug in series with all of the other components making our product line truly modular and intelligent because the distributed controls recognize each component by IP address and run accordingly. An example of this capability is being able to use eSorters as accumulators on the mainline of your sorter to increase throughput and accuracy and virtually eliminate recirculation.
G4 Multi Product 90 Degree eSorter
The most versatile modular sorter available, The G4 eSorter simply plugs straight in to eSort standard MDR accumulation beds and runs using the same controls and configuration and can even accumulate just like regular ZPA and sort at 30 units per minute.
- Patented
- Capable of handling 65lb. Boxes to 1 oz Poly Bags
- Sort Rate = 30 units per minute
- G4 can Accumulate on the sort position
- Run On Demand Technology – Sensor Array Controlled
- Sensor Array Confirmation Eyes at Discharge Locations
- Input Power can be 120V or 230/460 3 Phase to Power Supplies
- No Air Required 24v DC Drive
- eSort Insight Pulse Rollers
- Modular Design Easily Reconfigured
- 27″ Wide x 33″ Long (Standard Unit)
- Units can be located Back to Back or with an Intermediate Zone
- Heavy Duty 3″ x 3″ x 3/16 Square Tube Frame Supports
Z1 Multi Product 90 Degree Low Profile eSorter
This light duty versatile modular sorter handles polybags to light duty boxes and plugs straight into standard eSort MDR accumulation conveyor and like all eSorters it can accumulate like regular ZPA while using the same controls.
- Patented
- Capable of handling 14lb. Boxes to 1 oz Poly Bags
- Sort Rate = 40 units per minute
- Z1 can Accumulate on the sort position
- 5” High profile allows for multi-level sorters (high volume)
- Run On Demand Technology – Sensor Array Controlled
- Sensor Array Confirmation Eyes at Discharge Locations
- Input Power can be 120V or 230/460 3 Phase to Power Supplies
- No Air Required 24v DC Drive
- eSort Insight Pulse Rollers
- Modular Design Easily Reconfigured
- Units can be located Back to Back or with an Intermediate Zone
- Heavy Duty 3″ x 3″ x 3/16 Square Tube Frame Supports
Z4 Box and Tote 90 Degree Low Profile eSorter
The heavy duty workhorse of the eSort team. The Z4 is a versatile modular sorter handles heavy to light duty boxes and plugs straight into standard eSort MDR accumulation conveyor and like all eSorter’s it can accumulate like regular ZPA while using the same controls. The Z4 is the backbone of the SARA dock receiving and manifest sorting system developed by eSort.
- Patented
- Capable of handling 75 lb. Boxes
- Sort Rate = 30 units per minute
- Accumulate on the sort position
- Run On Demand Technology – Sensor Array Controlled
- Sensor Array Confirmation Eyes at Discharge Locations
- Input Power can be 120V or 230/460 3 Phase to Power Supplies
- No Air Required 24v DC Drive
- eSort Insight Pulse Rollers
- Modular Design Easily Reconfigured
- 28″ Wide x 34″ Long (Standard Unit)
- Units can be located Back to Back or with an Intermediate Zone
- Heavy Duty 3″ x 3″ x 3/16 Square Tube Frame Supports
30 and 45 degree eSort / Divert
The 30 & 45 degree eSort Divert is ideal for boxes and totes. The modular design allows these diverts to plug in to standard eSort ZPA accumulation and sort using standard eSort Insight control cards.
- Patented
- Capable of handling 55 lb. Boxes
- Sort Rate = 45-55 units per minute
- Z4 can Accumulate on the sort position
- Run On Demand Technology – Sensor Array Controlled
- Sensor Array Confirmation Eyes at Discharge Locations
- Input Power can be 120V or 230/460 3 Phase to Power Supplies
- No Air Required 24v DC Drive
- eSort Insight Pulse Rollers
- Modular Design Easily Reconfigured
- 28″ Wide x 36″ Long (Standard Unit)
- Units can be located close together with an Intermediate Zone
- Heavy Duty 3″ x 3″ x 3/16 Square Tube Frame Supports